Enter a search term above.

Cabling Between PC and Controls

Hardware handshaking is recommended for reliable data transmission. If the machine supports DTR/RTS, use this setting. Its nearly immediate response makes it especially suitable for drip-feeding.

If hardware handshaking is not available, use software handshaking (Xon/Xoff). Although slower than hardware handshaking, it works with the vast majority of machines.

Standard RS-232 Cable

Standard RS-232C Cable Between PC and Control with Hardware Handshake

Standard RS-232C cable with hardware handshake

Standard RS-232C Cable Between PC and Control with Software Handshake

Standard RS-232C cable with software handshake

Okuma RS-232C Cable Between PC and Control with Hardware Handshake

Okuma RS-232C cable with hardware handshake

Fanuc Cable

Fanuc Cable Between MOXA 2150 and Control with Hardware Handshake

RJ45 patch cable, control end mounted with a DB25M connector

Fanuc cable with hardware handshake

Fanuc Cable Between MOXA 2150 and Control with Software Handshake

RJ45 patch cable, control end mounted with a DB25M connector

Fanuc cable with software handshake